8 Port IP67 Ethernet Managed & Unmanaged Switch

ET-8xS-MIL-1

The Sixnet ET-8xS-MIL-1 is an ultra-reliable fast Ethernet (10/100) managed or unmanaged switch with military-style D38999 connectors. It is an ideal Commercial off-the-shelf (COTS) solution for battlefield communications, combat vehicles and avionics shipboard as well as any other industrial application that require hardened switches.

 

Product Highlights

• 8 fast Ethernet ports for 10/100 Mbps links
• IP67/NEMA 6 rated package totally protects against dust, water, oil, debris and more
• High performance switch rated for MIL-STD-810F, MIL-STD-461E and MIL-STD-1275B
• Military-rated MIL-DTL-38999 Series III connectors protect against vibration, shock, water and more
• Tough corrosion-proof aluminum enclosure
• Truly industrial -40 to +75°C operating range with conductive cooling (no moving parts) 

Applications

• Industrial outdoors
• Marine and maritime 
• Transportation such as trains
• Military on-vehicle (per COTS)
• Aerospace
• FEATURES
• Real-Time Ethernet Performance
  • Unmanaged or fully managed models available
  • Fast wire-speed switching with automatic intelligent routing for no collisions and no delays
  • Each port supports auto-speed/duplex, auto-crossover and auto-polarity
  • Managed models support advanced features such as RSTP, SNMP, QoS/CoS, IGMP, VLAN, security and much more
  
  Flexible Mounting Options
  • Direct-mounting saves money eliminating the need for additional enclosures, wiring and fittings
  • IP67 (NEMA6) water-tight case enables mounting into a vehicle or an exposed wall in harsh applications
  • Flat or on-edge mounting so connectors are conveniently on the side allowing for a more direct (less bends) and protected routing of your cables
  
  Trouble Free Operation
  • Direct 10-30 VDC power input with MIL-STD-1275B military-class spike and surge protection
  • Over 2,000,000 hours (MTBF) of trouble free service 
  • Hazardous locations rated for Class I, Division 2 (Zone 2) areas
  • 5 year industrial warranty standard
  • APPLICATION
  • With military equipment subject to harsh climates, varying temperatures, shock and vibration, defense requirements are mission critical. Equipment has to be built to withstand extreme stresses without sacrificing performance. Sixnet’s IP67 Ethernet switches are designed to reliably provide high-performance connectivity for the harshest defense applications. Military rated to support extreme defense conditions, our products link in-vehicle communication systems to support a host of military applications on the land, in the air and on sea. These include land vehicles, ground support facilities, missile delivery systems, bombers, aircraft, UAVs and naval vessels. 
  • SPECS
    
    Ethernet Performance
    • 8 fast Ethernet ports for 10/100 Mbps links
    • Store and forward wire-speed non-blocking switching
    • Managed or unmanaged model available
    • All IEEE802.3 Ethernet protocols supported
    • Auto-negotiation for Ethernet speed and duplex
    • Auto-crossover for Ethernet MDI/MDIX wiring
    • Auto-polarity for Ethernet TD and RD polarity
    • Full or half duplex operation (auto or configurable)
    • 2048 MAC addresses supported
    • 3.2 Gbps Memory bandwidth
    • Ethernet isolation 1500 VRMS 1 minute
    • Connector: MIL-DTL-38999 series III receptacle with shell size A, style 35, 6 socket contacts and N keying
    
    Ethernet Compliance
    • IEEE 802.3 (10Mbps Ethernet supports legacy devices)
    • IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
    • IEEE 802.3x (Full-Duplex with Flow Control)

    
    Power Input
    • Connector: MIL-STD-38999 Series III receptacle with shell size A, style 98, 3 pin contacts and A keying
    • Input voltage range: 10-30 VDC (continuous)
    • Input power: 4 W (typical under full load)
    • Reverse polarity protection
    • Exceeds MIL-STD-1275 for power protection
    • Surge protection: 100 volts for 1 second
    • Transient protection: 15,000 watts peak
    • Spike protection: 5,000 watts (10x for 10 uS) or 250 volts (50x for 100 uS)
    
    Environmental
    • Operating temperature: -40 to +75°C (cold start up at -40°C)
    • Storage temperature: -40 to +85 °C
    • Humidity (non-condensing) 5 to 95% RH
    • Vibration, shock and freefall per MIL-STD-810F and IEC6008-2-6, -27 and -32
    • Vent plug for high-altitude operation
    
    Physical
    • Dimensions (L x W x H): 10.5 x 4 x 2.45” (267 x 102 x 62mm)
    • Weight (including caps): 2.20 lbs (1 Kg)
    • IP67 dust, oil and water-tight package protection
    
    Standards & Compliance
    • FCC part 15/ICES-003; EN55022 ; IEC61326-1
    • UL508/CSA C22.2/14 for electrical safety
    • UL1604/CSA C22.2/213 for hazardous locations
    • EN60079-15 (Zone 2) for hazardous locations
    • MIL-STD-461E for EMC performance
    • MIL-STD-810F for environmental performance
    • MIL-STD-1275B for power protection
    • MTBF per MIL-HNDBK-217F2
    • 8ES: >2MM hour GB or 418,414 GM @ 40°C
    • 8MS: >2MM hour GB or 266,876 GM @ 40°C

    
    Managed Models
    

    • USB/RS232 console port via MIL-STD-38999 series III connector w/ shell size A, style 35, 6 socket contacts and A keying
    • Real-Time Ring™ or Rapid Spanning Tree (RSTP) for fast redundant ring or mesh networks
    • Priority queuing for real-time performance
    • SNMP v1 and V2 for network management
    • SNMP v3 for authentication and encryption
    • SNMP notifications (traps) for report on event
    • IGMP v1 and v2 for IP multicast filtering
    • VLAN (port and tag based) for traffic segregation
    • Message filtering to stop broadcast/multicast storms
    • RMON and port mirroring for diagnostics
    • Configuration via secure (https) Web interface, Telnet/SSH (network), terminal (RS232) or SNMP (v1, v2, v3)
    
    Recommended Interface Plugs
    • Ethernet Plug – D38999/26WA35PN
    • Power Plug – D38999/26WA98SA
    • USB/RS232 Plug –  D38999/26WA35PA